硅酸盐学报

金属氮化物结合刚玉质滑板抗渣性研究

作者：卜景龙杨晓春王瑞生王志发王榕林孙加林

单位：河北理工大学唐山钢铁公司耐火材料有限公司河北理工大学河北理工大学河北理工大学北京科技大学河北唐山063009北京科技大学北京100083 河北唐山063030 河北唐山063009 河北唐山063009 河北唐山063009 北京100083

关键词：滑板抗渣性金属氮化物

分类号：TF341

出版年,卷(期):页码：2005,33(2):253-257

DOI：

摘要：

对Al AlN Al2O3滑板与Al2O3 C滑板在1 600 ℃×3 h及1 650 ℃×3 h条件下,进行了坩埚法抗钢渣侵蚀实验。抗渣试验表明:Al AlN Al2O3滑板试样较之Al2O3 C滑板试样具有更优良的抗渣侵蚀能力。其原因可归于Al AlN Al2O3滑板的致密组织结构及金属Al和AlN的有益作用。AlN难以被钢渣润湿,可减缓钢渣的侵蚀和渗透;AlN的结合密实作用可阻碍金属铝的熔出。金属 Al高温下氧化形成Al2O3,刚玉与熔渣中的MgO反应形成Al2O3 MgO尖晶石,均使熔渣粘度及反应层致密度提高,因此提高了Al AlN Al2O3滑板的抗渣侵蚀能力。

The contrast experiment of slag resistance for Al-AlN-Al_2O_3 sliding plate and Al_2O_3-C sliding plate was carried out by means of crucible method under the conditions of 1 600 ℃ for 3 h and 1 650 ℃ for 3 h. The result shows that Al-(AlN-)Al_2O_3 sliding plate has better slag resistance than Al_2O_3-C sliding plate, the reason for which is due to the compact structure of Al-AlN-Al_2O_3 sliding plate and the useful function of Al and AlN. AlN is so difficult to be wet by the steel slag that the erosion and penetration are all slowed, and the compact structure can stop aluminum from separating out. The density of the slag and reaction layer can be improved through Al_2O_3 formed from Al under high temperature and Al_2O_3-MgO spinel formed from the reaction of corundum with MgO in melt slag. The slag erosion resistance of Al-AlN-Al_2O_3 sliding plate is improved eventually.

基金项目：

国家自然科学基金(50332010);; 河北省自然科学基金(E2004000436)资助项目。

作者简介：

参考文献：

[1]　韩兵强,李　楠.Al2O3W复合材料的抗渣蚀性能[J].耐火材料,2003,37(1):11—13.HAN Bingqiang,LI Nan.NaihuoCailiao(inChinese),2003,37(1):11—13. [2]　李一为,王习东,傅元坤,等.铝镁浇注料的抗渣侵蚀机理[J].耐火材料,2002,36(1):24—26.LI Yiwei,WANG Xidong,FU Yuankun, et al.NaihuoCail iao(inChinese),2002,36(1):24—26. [3]　KOMEYA K.Synthesis ofAlN by direct nitridation of alumi nium alloys[J].J CeramSocJpn,1993(1):319—321. [4]　SCHOLZ H.Nitridation reaction of moltenAl(Mg,Si)alloys[J].J MaterSci,1991(3):669—671. [5]　周和平,刘耀诚,吴　音.氮化铝陶瓷的研究与应用[J].硅酸盐学报,1998,26(4):517—522.ZHOU Heping,LIU Yaocheng,WU Yin.J ChinCeramSoc(inChinese),1998,26(4):517—522. [6]　岳瑞峰,王佑祥,陈春华.AlN陶瓷基板在空气中的热氧化行为探讨[J].硅酸盐学报,1998,26(5):565—570.YUE Ruifeng,WANG Youxiang,CHEN Chunhua.J ChinCe ramSoc(inChinese),1998,26(5):565—570. [7]　谭寿洪,陈忠明,林庆玲.SiC AlN固溶体的XRD和NMR研究[J].硅酸盐学报,1997,25(3):345—349.TAN Shouhong,CHEN Zhongming,LIN Qingling.J ChinCeramSoc(inChinese),1997,25(3):345—349. [8]　吴洁华,郭景坤,李包顺.SiO2AlN BN复合材料的制备和性能研究[J].硅酸盐学报,2000,28(4):365—370.WU Jiehua,GUO Jingkun,LI Baoshun.J ChinCeramSoc(inChinese),2000,28(4):365—370. [9]　杨晓春,姚春战,高　阳,等.金属氮化物结合滑板的研制与应用[J].耐火材料,2003,37(5):271—273.YANG Xiaochun,YAO Chunzhan,GAO Yang,et al.NaihuoCailiao(inChinese),2003,37(5):271—273.

服务与反馈：

【文章下载】【加入收藏】