硅酸盐学报

用Monte Carlo法对浮法玻璃退火窑间接冷却区内热过程进行数值模拟

单位：1. 北京科技大学机械学院热能工程系北京 100083 2. 斯坦因上海工业炉有限公司上海 201901

分类号：TQ171.6

出版年,卷(期):页码：2012,40(2):317-323

DOI：

摘要：

摘要：基于Monte Carlo法及数值模拟算法，建立了浮法玻璃退火窑间接冷却区(辐射换热冷却区)通用的退火模型，该模型可以对浮法玻璃带在间接冷却区内的退火冷却过程进行模拟仿真。对仿真数据进行现场测试，结果表明：玻璃带与风管的计算值与测量值的最大误差分别为2.12%和–4.64%，整体误差控制在5%以内。

Abstract: An annealing model, which can be used to simulate the annealing cooling process of the float glass ribbon in indirect cooling zones (radiation heat transfer cooling zones) of lehr, was established by Monte Carlo method and numerical simulation algorithm. The results show that the maximum errors of temperature of glass ribbon and cooling tubes between the simulated values and the measured values are 2.12% and –4.64%, respectively, and the overall errors are controlled within 5%.

基金项目：

中央高校基本科研业务费专项资金(FRF–AS–10–005B)资助。

作者简介：

第一作者：张范斌(1971—)，男，博士研究生。通信作者：温治(1962—)，男，教授，博士研究生导师。

参考文献：

[1] GARDON R. Modelling annealing lehrs for flat glass [J]. J Am Ceram Soc, 1981, 65(8): 372–379.

[2] CHUI G K. Heat transfer and temperature control in an annealing lehr for float glass [J]. J Am Ceram Soc, 1977, 60(11): 477– 484.

[3] GARDON R. Nonlinear annealing of glass [J]. J Am Ceram Soc, 1981, 64(2): 114–119.

[4] 李会平. 浮法退火窑中玻璃带传热的数学模型[J]. 华东化工学院学报, 1992, 18(S1): 6–12.

LI Huiping. J East China Institute Chem Technol (in Chinese), 1992, 18(S1): 6–12.

[5] 孙承绪, 陈鸣. 浮法玻璃退火窑间接冷却区内传热过程的数值模拟[J]. 玻璃, 1990, 17(1): 5–10.

SUN Chengxu, CHEN Ming. J Glass (in Chinese), 1990, 17(1): 5–10.

[6] LEE A B. Elements for real time steady simulation of flat glass lehr Control [R]. SAND2001–8001, Livermore, California: Sandia National Laboratories, 2001: 28–20.

[7] LENTES F T. Three-dimensional radiative heat transfer in glass cooling processes [D]. Germany: Institut für Technound Wirtschaftsmathematik e.V. Kaiserslautern, 1999: 13–16.

[8] HOWELL J R, PERLMUTTER M. Monte Carlo solution of thermal transfer through radiant media between gray walls [J]. J Heat Transfer-Trans ASME, 1964, 86(1): 116–122.

[9] 徐钟济. 蒙特卡洛方法[M]. 上海: 上海科技技术出版社, 1985: 1–80.

XU Zhongji. Monte Carlo Method (in Chinese). Shanghai: Shanghai Scientific and Thchnologic Press, 1985: 1–80.

[10] GARDON R. The emissivity of transparent materials [J]. J Am Ceram Soc, 1956, 39(8): 278–287.

[11] EVANS C R. A thermal model for a float glass annealing lehr [D]. USA: Massachusetts Institute of Technology, 1982: 43–47.

[12] 卞伯绘. 辐射换热的分析与计算[M]. 北京: 清华大学出版社, 1988: 138–142.

BIAN Bohui. Radiation Heat Transfer Analysis and Calculation (in Chinese). Beijing: TsinghuaUniversity Press, 1988: 138–142 .

[13] 张伟清, 宣益民, 等. 单元表面间辐射传递系数的新型计算方法[J]. 宇航学报, 2005, 26(1): 77–80.

ZHANG Weiqing, XUAN Yimin, et al. J Astronautics (in Chinese), 2005, 26(1): 77–80.

[14] 陈维汉. 管内流动换热过程的性能综合分析[J]. 华中科技大学学报, 2001, 29(S1): 18–21.

CHEN Weihan. J Huazhong Univ Tech (in Chinese), 2001, 29(S1): 18–21.

[15] 杨世铭, 陶文铨. 传热学(第三版)[M]. 北京: 高等教育出版社, 1998: 164.

YANG Shiming, TAO Wenquan. Heat Transfer (3rd ed). Beijing: High Education Press, 1998: 164.

[16] 帕坦卡. 传热与流体流动的数值计算[M]. 张政, 译. 北京: 科学出版社, 1984: 62–67.

PATANKAR S V. Numeral Simulation on Heat Transfer and Fluid Flow (in Chinese). ZHANG Zheng, transl. Beijing: Science Press, 1984: 62–67.

服务与反馈：

【文章下载】【加入收藏】